Double mitre manual circular saw for solid materials and profiles (construction steels in general).
Blade disc 315 mm.
Two way miter cutting (from 0° to 45° right and left).
Two cutting speeds threephase motor or single speed monophase motor.
Quick lock vice with anti-burr clamping.
Optional pedestal in steel plate.

Cutting cycle: Vice locking of material to cut – the sawdisc runs as long as the operator holds the gripswitch – manual pull down of the cutting head.

Mep 352 Falcon Manual Circular Sawing Machine

FALCON 352, manual pull-down sawing machine to cut metals mitering from -45° to +45°, which can be supplied with or without a steel base.
HEAVY-DUTY

> The cast-iron structure absorbs vibrations and ensures greater cutting stability and longer blade life.

> The double head return spring ensures maximum safety during the cutting cycle. 

> The adjustable steel anti-burr device clamps the material both in the infeed and outfeed.

> The control panel equipped with thermal relay and minimum-tension coil ensures maximum protection against phase failure.
EXCEPTIONAL FLEXIBILITY
> The mechanical stops at -45°, 0° and +45° with locking device at all angles in between allow the quick positioning of the saw head.

> The cutting vice equipped with a sliding jaw allows to clamp the material as close as possible to the cutting line.

> Engraved metric scale and flip-over stop are the perfect solution for precision and serial cuts at any length. 

COBRA 352 MA, manual pivoting sawing machine with hard-metal teeth blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.

The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°.

HEAVY-DUTY

> The cast-iron structure absorbs vibrations and ensures greater cutting stability and longer blade life.

> The transmission system equipped with pulleys and belts ensures high rigidity.

> The large working surface equipped with a turning table assembled on a thrust bearing of diameter of 425 mm ensures maximum cutting stability.

> The automatic coolant spray mist device, activated only when the cycle starts so as to avoid waste, grants an excellent blade cooling and longer life.